Our range of LED profiles are sold in 1M & 2M lengths. They are supplied as an aluminium profile and diffuser as standard. We have many different shapes to cover all the different applications that you may have. All profiles can easily be cut to specific measurements. When ordering please remember to purchase a length greater than is required and cut the profile down to the required length. As an example, if 3.5 metres is required order either 4 x 1m lengths or 2 x 2m lengths.

Should you have a complex requirement that requires multiple long lengths of profile, please contact our sales team who will be able to advise on what lengths of profile to purchase to minimise wastage of material.

Top Tip – to fix a profile either drill holes into the profile and screw in or use a mounting clip (available as an accessory). If the profile is to be drilled ensure that the LED strip is installed after the profile has been mounted into position.

We have a comprehensive range of accessories available to complete your LED Profile project. End caps to seal each end of the profile. Mounting brackets, that are important as they enable the fixing of the tape to the profile before mounting the complete profile. The brackets can be fixed and the profile then clips into place. Sensors are simple plug and play devices that can be operated by movement detection, touch or opening of a door.

We have multiple choices for drivers to purchase in order to suit different requirements like the need for them to be inside (IP20), outside (IP66), dimmable or multiport. Each driver will be compatible with the LED Strip you choose and you have the option of each of these categories to choose from depending on which one suits you and your requirements best.

Top Tip – always select a driver that has a higher power than is required by the profile. Drivers can power down easily but will have a shortened life if the power required by the LED strip is greater than that of the driver.