PHILIPS MasterColour CDM-TM Mini PGJ5 20W/830

PHILIPS MasterColour CDM-Tm Mini PGJ5 20W/830 is a high-quality Ceramic Metal Halide discharge lamp designed for applications where bright, attractive and reliable lighting is required.

This 20W lamp produces 1,600 lumens of warm white light with a colour temperature of 3000K. Its CRI of 87 provides good colour rendering, making it suitable for applications where the accurate and attractive presentation of colours is important.

The compact design and PGJ5 single-ended base make the PHILIPS MasterColour CDM-Tm Mini particularly suitable for small and compact lighting fixtures. It is commonly used for retail and shop displays, accent lighting, decorative lighting and other applications requiring focused, high-quality illumination.

The lamp has a nominal lifetime of up to 12,000 hours and is designed for use with compatible electronic control gear. It is non-dimmable and should be installed in a suitable, fully enclosed luminaire.

Key Features:

• Brand: PHILIPS
• Product Range: MasterColour CDM-Tm Mini
• Wattage: 20W
• Colour Temperature: 3000K
• Colour Code: 830
• Light Colour: Warm White
• Lumens: 1,600 lm
• Colour Rendering Index: CRI 87
• Cap/Base: PGJ5
• Lamp Shape: T13.3
• Lamp Type: Ceramic Metal Halide / HID
• Nominal Lifetime: Up to 12,000 hours
• Dimmable: No
• Operating Position: Universal
• Ideal for: Retail, display, accent and decorative lighting

Installation Instructions:

1. Switch off and isolate the electrical supply before installation.
2. Allow the existing lamp and fitting to cool completely before handling.
3. Check that the luminaire is compatible with a PHILIPS MasterColour CDM-Tm Mini PGJ5 20W lamp.
4. Ensure that the fitting is suitable for use with the correct compatible control gear.
5. Remove the existing lamp according to the luminaire manufacturer's instructions.
6. Carefully insert the new lamp into the PGJ5 lampholder and ensure it is securely positioned.
7. Avoid touching the glass part of the lamp with bare hands. If the glass is touched, clean it carefully with a suitable lint-free cloth.
8. Make sure the lamp is correctly installed and that the luminaire is fully enclosed before switching the power back on.
9. Restore the electrical supply and allow the lamp to complete its normal start-up cycle.

Safety Information:

This is a high-intensity discharge lamp and should be installed by a suitably qualified person. The lamp must be used in a compatible, fully enclosed luminaire. Always follow the luminaire and control-gear manufacturer's installation instructions.

Do not operate the lamp outside its intended application or with incompatible control gear. Allow the lamp to cool before removal or replacement.